IWAC 208

   IWAC208 + SUB118T datasheet
   IWAC208 installation
   IWAC accessories configuration


IWAC 208

The IWAC208 line array is very compact, but it has been designed to provide a very smooth sound dispersion on all the frequency range.
Matched with the SUB118T subwoofer, it will make of a system setup exceeding all expectations.


System constitution:
The complete system should have IWAC208 line array speaker, flying frame, amplifier rack and the frame of amplifier rack.
The standard application is 4pcs IWAC208 cabinet match with 2pcs SUB118T or SUB218 each side. The V4.25 amp can drive IWAC208 and V2.20 amp drive SUB118T or SUB218. It has fully integrated rigging, no tools are needed for building a complete setup.The IWAC208 line array can be used for:


  • Mid and big performance.
  • High end Bar and Disco.


IWAC208 Fitting

Excellent sound performance:
IWAC208 line array speaker module adopts two way external crossover design, 2 x 8inch bass and 2 x 1.73inch HF drivers. It can output high SPL and Long distance sound diffusion with low distortion.


  • Completely using physical methods correct phase and frequency response.
    No need DSP electronic balance adjustment, can get very flat frequency response (100~13kHz);
  • < 90 ° phase deflection,>98% sound surface.
    Sound image in the front, positioning clear.

The rigging system:
IWAC208 line array module has a 1°/step rigging frame on the side and under a 12:1 safety factor can be used to rigging 12pcs line array module.

  • Scalable design for extension bar ,precise construction, easy to use,no noise,strong fault tolerance
  • The big rigging frame can rigging by 1 point or multi-point, both 3/4 inch and 5/8 inch push-pin are suit for the frame.

The amplifier rack
IWAC208 line array has a 6U height power amplifier rack which can be hanging and put one Verity V4.25 amps and one DSP can drive 8pcs IWAC208 speakers.

  • In this way, we can shorten the speaker cable and make the operation more simpler and also can reduce the signal distortion.
  • Simpler system connection、lower cost、more reliable using experience.



Model IWAC208 SUB118T
Power Capacity LF:400W HF:120W AES / LF:800W HF:240W Program 2000W AES / 4000W Program
Nominal Impedance LF:16Ω  /HF: 16Ω 4Ω(Optional 8Ω configuration)
Frequency Response (-10dB) 80-18.5kHz 29-1.5kHz
Average Sensitivity LF:98dB ; HF:108dB 95dB
Maximum SPL >136dB (pink noise 1m 1box) >136dB (pink noise 1m 1box)
Horizon 106º  
Vertical 6°( 1 box )  
LF Driver 2 x 8″ Neodymium driver  18″ Carbon fiber cone ferret driver
Voice coil 2″( 52 mm) 6″( 152 mm)
HF driver 2 x 1.73″driver  
Voice coil 1.73″(44mm)  
Exit 1″(25.5mm)  
Connector 2x NEUTRIK  NL4 SPEAKON parallel   LF : ±1  HF : ±2 2x NEUTRIK  NL4 SPEAKON parallel   LF : ±1  HF : ±2
Cabinet CNC made 15mm birch wood sandy wear-resisting environmental polyurea spray paint CNC made 18mm birch wood sandy wear-resisting environmental polyurea spray paint
Hanging side frame Laser processing steel plate joining together with black paint Have 8PCS Ø10stainless steel
push-pin Angle is not adjustable
Laser processing steel plate joining together with black paint have 4PCS Ø8 stainless steel push-pin Angle is not adjustable
Product Dimensions(mm) 684 x 271 x 365 688 x 522 x 760
Package Dimensions(mm) 850 x 370 x 470 910 x 670 x 840
N.W/G.W 28.5kg / 33.3kg 82kg / 92kg

Verity Audio reserves the rights to make changes in specification without prior notice.
The final specification is subject to the user’s manual.