Suitcase 4250S

Multi combination
Light weight
Small size
large power

Class D power module and power factor correction allow Suitcase4250S and Suitcase4250T to adjust current according to the AC voltage waveform, adapt to much wider voltage range worldwide.
Suitcase4250S Speakon output interface and Suitcase4250T Phoenix terminal output interface can meet different user requirements.IT can work as 2 channel、3 channel、4 channel power amplifier by choose different working mode, matched with Wardrobe casing which is much better to show the characteristic of Multi combination and flexibly application.


Model Suitcase 4250S Suitcase 4250T
Output power  
8Ω Stereo* 230W x4* 230W x4*
4Ω Stereo** 440W x4* 440W x4*
8Ω Bridge** 860W x2* 860W x2*
Other specifications
Frequency Response 20Hz – 20kHz,(±1dB) 20Hz – 20kHz,(±1dB)
THD+N ≤0.02% ≥ 98dB
S/N Rate ≥ 98dB ≥ 98dB
Input sensitivity 1V 1V
Input Impedance (bal/unbal) 40kΩ / 20kΩ 40kΩ / 20kΩ
Voltage Gain 34.5dB 34.5dB
Output circuitry Class D Class D
Cooling Air flow from front to rear Air flow from front to rear
protection Soft start, VHF, DC, short circuit, over load, clip limit, over heat, progressive volume
Input Balance input XLR-F, Balance output XLR-M Balance input XLR-F, Balance output XLR-M
Output NL4 SPEAKON Phoenix Terminal
Front panel Front panel indicator: Working indicator, Signal/Clip/Protection/Power on/-5db/
-10db/-20db / volume control knob
Rear panel Stereo/parallel/bridge selection switch
Dimension / Weight
Product Dimensions (mm) 483 x 140 x 85 483 x 140 x 85
Packing Dimensions (mm) 455 x 255 x 175 455 x 255 x 175
G.W 3.9kg 4.0kg
Power Supply 10A Power Cord 10A Power Cord

1、*Power tested under EIA standard.
2、**Power tested under the condition of 40ms burst, 1KHz sine wave and 1% THD.
3、Verity Audio reserves the right to make any changes to the product specifications without prior notice. Final pecifications to be found in the user manual.